Zte ZXHN H267N, Management Manual

Page: 27 / 112

Chapter 3 Configure the Internet
5. Set the parameter Type to be Bridge connection . The Bridge-based connection
page is displayed, see Figure 3-7 .
Figure 3-7 Bridge Page
Table 3-4 lists the New Item parameters.
Table 3-4 Parameter Descriptions for the Bridge-based connection
Parameter Description
Connection Name Name the connection.
xDSL Transfer Mode There are two xDSL transfer modes:
l
ATM
l PTM
In the case of IPv4_PPPoE, select PTM.
ATM Parameters
VPI / VCI If xDSL Transfer ModeEnter is selected to be ATM,
the VPI / VCI values provided by the ISP needs to be
configured.
VPI Range: 0 - 255.
VCI Range: 0 - 65535.
Service Type If xDSL Transfer ModeEnter is selected to be ATM,
Service Type needs to be configured.
ATM QoS used to limit the transmission of uplink traffic.
The options are: CBR , RT-VBR , nRT-VBR , and UBR .
PCR If Service Type is selected to be CBR , RT-VBR or
nRT-VBR , PCR needs to be configured.
3-11
SJ-20140702105807-002|2014-11-13 (R1.0) ZTE Proprietary and Confidential