Zte ZXHN H196A, User Manual

Page: 8 / 12

Rear panel
Figure 3-2 shows the interfaces and buttons on the rear panel of the ZXHN
H196A.
Figure 3-2 The Rear Panel
Interface/Button Function
POWER
Power supply port, it is connected to the power
adapter.
WAN
RJ-45 port, it is used to to connect to the uplink
access network.
LAN1/LAN2
RJ-45 port, it is used to connect the modem to
computer , STB or other network devices.
RESET
During power ON period, hold on this button for more
than 5 seconds to reset the current settings to the
factory default setting, and then the system restarts
automatically.
WPS
WPS Push Button, press this button to enable or
disable the WPS function.
• *The WPS button is located in the front of the device, but there is no mark.