ZXDSL 831A
Ⅱ
User’s Manual
7
LED No.
Color
Status
Note
On
The USB interface is in the communication status
Off
The Ethernet interface is in the non-communication
status
Flash
Data is received or sent on the Ethernet interface
Ethernet Green
On
The Ethernet interface is in the communication status
Rear panel
Figure 3.1-2 Rear Panel of the ZXDSL 831A
Ⅱ
Table 3.1-2 Description of Interfaces on the Rear Panel
Item
Introduction
DSL
RJ-11 connection interface: The equipment is connected to the ADSL line or
splitter via the telephone line.
USB
USB connection interface: Connect it to the PC computer using the USB
cable.
Reset
In the power-on state, you can restore the system to the default configuration
by using a thin needle to press this slot for five seconds
Ethernet
RJ-45 connection interface: Connect it to the PC computer or other network
devices using the network cable.
PWR
Power interface. Connect it to the power adapter.
Power switch
3.2 Hardware Connection
Summary of Contents for ZXDSL 831A II
Page 17: ......
