132
FCC RF Exposure Information (SAR)
This phone is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy
set by the Federal Communications Commission of the United
States and Industry Canada of Canada.
During SAR testing, this device was set to transmit at its
highest certified power level in all tested frequency bands, and
placed in positions that simulate RF exposure in usage against
the head with no separation, and near the body with the
separation of 15 mm. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
device while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple
power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
The exposure standard for wireless devices employing a unit
of measurement is known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg and 1.6 W/kg
by Industry Canada.
This device is in compliance with SAR for general
population/uncontrolled exposure limits in ANSI/IEEE
C95.1-1992 and Canada RSS 102 and had been tested in
accordance with the measurement methods and procedures
specified in IEEE1528 and Canada RSS 102. This device has
been tested and meets the FCC and IC RF exposure
guidelines when tested with the device directly contacted to
the body.
Summary of Contents for Z557
Page 1: ...1 ZTE Z557 USER GUIDE ...
