Zte MF60 User Manual Download

Page: 6 / 48

ZTE MF60 User Manual

6 Confidential and Proprietary Information of ZTE CORPORATION



Connect the client to your device via USB cable.

Notes:

•

Press

WPS

and

Power

buttons simultaneously, and hold on about three seconds until all LEDs are off,

then release the buttons, the device will restart automatically and restore to the factory default settings.

•

is a trademark of SD Card Association.

Indicators

When the device is powered on, the following icons will appear on the LED screen, with the

corresponding indications listed in the table below:

Icon

Indication

Network signal strength.

Network type. 2G or 3G icon will appear on the LED screen according to the network

being connected.

Roaming network indication.

Connect to the Internet automatically.

Connect to the Internet manually.

Wi-Fi status and number of the connected users.

New incoming message indication.

Battery power indication.

Hardware Installation

Inserting SIM Card and Battery

1. Use the thumb catch at the bottom of the device to open the battery cover.

Summary of Contents for MF60

















































Search results

Summary of Contents for MF60

Reviews:

Related manuals for MF60

Brands by name

Popular brands

Zte MF60, User Manual

Search results

Summary of Contents for MF60

Reviews:

Related manuals for MF60

Brands by name

Popular brands