•
RTS Threshold
: Set the wireless network RTS threshold.
•
TX Power
: Set the wireless network TX power.
•
Short Preamble
: Disable short preamble or not.
•
Short Slot
: Enable short slot or not.
•
Tx Burst
: Enable Tx burst or not.
•
Pkt_Aggregate
: Enable packet aggregation or not.
•
IEEE 802.11H Support
: Support IEEE 802.11H or not.
•
Country Code
: Select the desired country.
•
WMM Capable
: Enable Wi-Fi Multimedia(WMM) or not.
•
APSD Capable
: Enable APSD or not.
Click
Apply
to confirm your configuration, or click
Cancel
to cancel your configuration.
Security
Select
Wi-Fi Settings > Security
, the Security parameters and Wireless MAC Filtering parameters are
shown in the following figure:
•
Security Mode
: Including
OPEN
,
SHARED
,
WEPAUTO
,
WPA-PSK
,
WPA2-PSK
or
WPA-PSK/WPA2-PSK
.
•
Encrypt Type
: Use WEP Encryption or not.
•
Add MAC Filtering Rule
: Choose the type of MAC filtering. When you select
disable
, the MAC
addresses are not used to control network access.
The security modes are described below:
•
Open
: You can authenticate successfully with a SSID, whether it is valid or empty.
•
Shared
: The WLAN clients who have the same WEP key with wireless gateway can pass the
authentication and access the wireless network.
24
