Zte i766, User Manual

Page: 22 / 91

14
Note:
Please turn off your mobile phone before taking out the
battery.
1.5.3 Charging the Battery
The lithium battery can be used directly after being taken out from the package.
To make the battery always in its best condition, please exhaust the capacity
of the battery and then fully recharge it for the first three times.
1.
Plug in the charger;
2.
Insert the charger plug into USB port of your mobile phone;
3.
When the phone is powered on, the battery capacity bar on up-right
corner of the screen keeps scrolling during charging; when the phone
is powered off, there will be charging indication on the screen during
charging. If the phone is used excessively without enough capability,
the charging indication will not immediately appear on the screen of
the phone when charging starts
，
and the phone might not be powered
on within a few minutes after the charging starts;
4.
When the phone is on, the battery is fully charged as the battery
capacity bar on the up-right corner of the screen is full and doesn’t
flicker any longer. When the phone is off, the battery is fully charged as
fully charged picture appears on the screen. During the charge, your
mobile phone and charger may normally become hot;
5.
Please disconnect the charger from your mobile phone and the outlet
when the charging is completed.