manualshive.com logo in svg

Zte C362+, User Manual

Share
Download
Zte C362+ User Manual Download Page 63

    

                      

 

 

 

51

display. Select Option to   

Erase

: to erase the record. 

Info

: the title, length, size, and time information of the 

record. 

Erase all

: to erase all record list. 

 

Erase all

: Erase all record.   

Note

:

 

The record saved in normal will be listed in 

Profiles

→

 

Vibrate/Silent/General/Outdoor/Meeting/Handset

→

 Profile Edit

 

→

Ring Tone

→

 Ring Type

→

 Record Ring

 as a kind of ringer 

tone.You can select it or not as you like as ring of the phone. The 

record can not be deleted as if it is activated as the ringer, unless you 

cancel the record as the ring of the phone. 

7.2.2 Recording in Conversation 

When you are in conversation, select 

Record

 to pop-up window 

of 

Voice Memo

 and select

 Start 

to begin a new Recording,

 

or 

Stop

, 

Pause/Resume 

recording, without ending the call. 

The record will be saved automatically when the call is ended 

without finishing recording, and exit back to interface of ending call.   

7.2.3 Recording with Incoming Call/Message 

 

With Incoming Call 

While recording in state of non-conversation, receive a call 

will stop recording. The record of phone will be saved 

automatically and return to call interface. 

Summary of Contents for C362+
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands