Zte C362+ User Manual Download

Page: 46 / 79

option you can:

Send:

Send message to the recipient selected.

Send To All:

Send messages to all the recipients in

group.

- Replace:

Reedit the number in group.

- Remove Member:

Erase the recipients in group.

- Clear Group:

Clear all the recipients’ information in group.

- Add:

Add new

recipient in group.

Rename

: Rename the Msg Group.

Clear Group

: Erase the SMS group.

Clear All Groups

: Erase all SMS group.

Send

: Send messages to the SMS group.

The maximum of receivers not exceed 20 persons.

5.9 Message Setting

You can set your message box before you use it.

5.9.1 Msg Priority

1. Select

Menu

→

Messages

→

Msg Settings

→

Text Msg

Settings

→

Msg Priority

. Select

Normal

Interactive

Urgent

Emergency

for sending

message.

5.9.2 Delivery Acknowledging

1. Select

Menu

→

Messages

→

Msg Settings

→

Text Msg

Summary of Contents for C362+
















































































Search results

Summary of Contents for C362+

Reviews:

Related manuals for C362+

Brands by name

Popular brands

Zte C362+, User Manual

Search results

Summary of Contents for C362+

Reviews:

Related manuals for C362+

Brands by name

Popular brands