Zte C362+ User Manual Download

Page: 49 / 79

All the contacts will be listed by the letter of the name.

1. Select

Menu

→

Messages

→

Msg Settings

→

General

→

Fire

Proof

→

Friend List

2. Press

OK key

and select options:

Add:

Add new contact in Friend List.

Edit:

Edit this contact in Friend List.

Delete:

Delete this contact in Friend List.

Clear all:

Delete all the contacts in Friend List. If there is no

contact in the list, “List Empty” will be displayed.

Black List

All the contacts will be listed by the letter of the name.

1. Select

Menu

→

Messages

→

Msg Settings

→

General

→

Fire

Proof

→

Black List

2. Press

OK key

and select options:

Add:

Add another new contact in Black List.

Edit:

Edit this contact in Black List.

Delete:

Delete this contact in Black List.

Clear all:

Delete all the contacts in Black List. If there is no

contact in the list, “List Empty” will be displayed

Current Settings

You can set barring applications as follows:

Bar All:

Bar all incoming calls.

Bar Black List:

Only bar numbers listed in Black List.

Bar All Except Friend List:

Only numbers listed in Friend

Summary of Contents for C362+
















































































Search results

Summary of Contents for C362+

Reviews:

Related manuals for C362+

Brands by name

Popular brands

Zte C362+, User Manual

Search results

Summary of Contents for C362+

Reviews:

Related manuals for C362+

Brands by name

Popular brands