background image

 

  ZTE AD226 User Manual

 

2 Confidential and Proprietary Information of ZTE CORPORATION

 

regulations. 

 Always handle the Modem with care. Be careful not to drop or bend the Modem. 

 There are no user serviceable parts inside the Modem. Unauthorized dismantling or repair of the modem 

will void the warranty. 

 This  Modem  generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in 

accordance with the instructions, may cause harmful interference to radio communications. 

 There  is  no  guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  modem  does 

cause  harmful  interference  to  radio  or  television  reception,  which  can  be  determined  by  turning  the 
modem off and on. 

 This Modem must be installed and operated in accordance with provided instructions and must be used 

to  provide  a  separation  distance  of  at  least  5  mm  from  all  persons  and  must  not  be  co-located  or 
operating in conjunction with any other transmitter. 

Modem 

 Please  use  original  accessories  or  accessories  that  are  authorized  by  the  manufacturer.  Using  any 

unauthorized  accessories  may  affect  your  Modem‟s  performance,  and  violate  related  national 
regulations about telecom terminals. 

 Avoid  using  the  Modem  near  metallic  structure  device  or  establishment  that  can  emit  electromagnet 

wave. Otherwise it may influence receiving of signals. 

 The Modem is non-waterproof, please keep it dry and store in shady and cool place. 

 Don‟t  use  the  Modem  immediately  after  a  sudden  temperature  change  e.g.  from  an  air  conditioned 

environment  to  high  temperature  and  humidity  outside.  In  such  cases  there  could  be  condensing 
moisture  inside  the  Modem  which  can  cause  internal  damage.  Unplug  the  Modem  and  leave  it  for  30 
minutes before use. 

 Take the Modem carefully. Don‟t drop, bend, knock or harshly treat it to avoid destructive damage. 

 Do not attempt to disassemble the Modem by yourself. Changes and modifications made to the Modem 

without the approval of manufacturer could void your authority to operate this Modem. 

In Aircraft 

 Please power off the modem before the airplane takes off. In order to protect airplane‟s communication 

system from interference, it is never allowed to use the modem when it is in flight. Using it before the 
airplane taking off should get aircrew‟s permission according to safety regulations. 

Cleaning and Maintenance 

 ZTE  AD226  WiMAX  USB  Modem  is  non-waterproof,  please  keep  it  dry  and  store  in  shady  and  cool 

place. 

 Do not use or store the device in dusty or dirty areas, since its moving parts and electronic components 

can be damaged in such environment. 

 If you want to clean your modem, please use clean fabric that is a bit wet or anti-static. Do not use harsh 

chemical  cleaning  solvents  or  strong  detergents  to  clean  your  modem,  such  as  alcohol,  dilution  agent 
and benzene. Power-off your modem before you clean it. 

 Use modem within a temperature range of -10

~55

  and a humidity range of 5%~95%. 

Limit Warranty 

The warranty does not apply to defects or errors in the product caused by: 

1. Reasonable abrasion. 

Summary of Contents for ad226






















Reviews: