Page 1
START HERE
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
Auto makers offer varied models to each vehicle and occasionally manufacture
more than one body style of the same model. To assure your part is correct; our tech
department can be contacted at [email protected] to verify fitment and assist with
technical questions. All other inquires can be directed to [email protected]. In the
event you do not have internet access please call 844-653-8040
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR MODEL OR PART.
Parts included
hardware
INCLUDED
Installation Guide
STEP 2
Z
84
54
0
1
(6)
M6 x 1.0 MM x 16 MM Screw (Black Oxide)
(
10
)
M8 x 1.25 MM x 30 MM Screw (Black Oxide)
(
24
)
M8 x 1.25 MM x 20 MM Screw (Black Oxide)
(
8
) M8
x 1.25 MM Flange Nut
(
34
)
Split Lock Washer for M8 Screw Size (Black Oxide)
(8) M6 Washer
(4) M6 x 1.0 MM x 20 MM Screw (Black Oxide)
(4) M6 Lock Nut
(8) M8 Hex Nut (Stainless Steel)
(8) M8 x 20 MM Hex Head Cap Screw
(8) 3/8 "x 7.8" Metal Washer
(8) M8 Split Lock Washer
(4) 1/32" Rubber Padding
(8) 1/8" Rubber Padding
(4) 1/8" x 2" x 39" Rubber Padding
(10) Zip Ties
Z3254
1
1
Same as Z
84
54
0
1 but includes
(
8
)
3" LED Pod Lights (6 White, 2 Amber) + Wiring
Z
84
54
2
1
Same as Z
84
54
01
but includes
(8) 3" LED Pod Lights (6 White, 2 Amber) + Wiring
(1)
30" Light Bar + Wiring
+ Brackets
(2)
1/4" - 20 Nylon Lock Nut
(2) 1/4" x 5/8" Flat Washer
ALL Z
84
54
XX
MODELS
(1) Front
Crossbar w/ LED Bracket
(1) Side Tubing Assembly (Left)
(1) Side Tubing Assembly (Right)
(1) Front Left Mounting Assembly
(1) Front Right Mounting Assembly
(1) Rear
Tubing
Assembly
(2) Mid Clamping Bracket
(1) Rear Clamping Bracket (Left)
(1) Rear Clamping Bracket (Right)
(2) Mid Crossbar
(2) Rear Crossbar
2)
As shown to the left, install the provided (8) pieces of
1/8" Rubber Padding onto
the bottom of
each base.
STEP 1
NOTE BEFORE YOU
START INSTALLATION
Not included but required
•
Blue Threadlocker
•
Hand tools set
•
(2) 60 in. x 2 in. x 4 in. Spacers or similar to
install accessories on rack prior to attachment
to the vehicle.
1) Remove
the
windshield caps to expose the roof rack
mounting points
by depressing the tab on the back side
of the cover located closest to the roof panels.
20
21
FOR
D BRONCO
(Fits all except soft top)
4 DOOR -
Z845401, Z84541
1
,
Z845421
CARGO RACK
© COPYRIGHT 2021 - ALL RIGHTS RESERVED- ZROADZ LED, INC.
