ZRide e-city, Owner'S Manual

Page: 9 / 14

9
RIDING RECOMMENDATIONS
Check the spare parts below before riding the scooter:
1. Check the tyre condition for any worn-out
areas or breakage.
2. Check the transmission system condition.
3. Check the tyre pressure.
4. Check the bugle and rear reflector condition.
5. Check all the standard spare parts such as nuts and screws and ensure they are well tightened.
6. Check if the brake cable lanyard functions in smooth condition.
7. Charge the battery when the scooter is not driven regularly. To prolong the battery life, charging
should be carried out 15 days during each summer and 30 days during each winter.
8. Check all the turning parts frequently such as the handle bar. Add lubricant when
needed.
9. Check the light.
RIDING INSTRUCTIONS
1. Fold up the kickstand and hold onto the handle bars with both hands. Assume a well-balanced position
on the scooter and push off with your foot.
2. Turn power on (by turning the key from” ”to” ”). Your right hand will control th e accelerator.
Twist the accelerator slowly to avoid a sudden rush of speed forward. The speed of the bike will
increase as you twist the accelerator further. Release the accelerator and apply the brakes to stop
your scooter. You will control the speed of the scooter by using both the accelerator and the brakes.
Squeezing the break handle cuts the power to the accelerator.
TROUBLE SHOOTING GUIDE
Problem Cause Solution
The power indicator illuminates but scooter still does
not work
x
The accelerator is not operating
properly.
x
The single kick stand is not folded up
properly.
1. Replace the accelerator. Call Customer
Service to order a new accelerator.
2. Fold up the single kick stand.
The power indicator does not work when power is
on.
x
The fuse or fuse socket has blown.
x
The battery box is not place properly.
1. Replace the special fuse or fuse socket.
2. Adjust the battery box in the proper way.
Distance per charge is less than normal
x
Not enough air pressure in the tyres.
x
Not enough charging or the battery is
defective.
x
Stopping and starting up frequently.
x
Riding uphill or against strong wind.
1. Inflate the tyres.
2. Recharge battery or replace battery.
3. Call Customer Service to order a new
battery.
4. Ride on even roads with regular speed
and in good weather conditions.
Electric scooter is losing speed
x
Low battery charge.
x
Battery is defective.
1. Recharge your battery for 6-9 hours.
2. Replace battery. Call Customer Service
to order a new battery pack.
Accelerator not working
x The brake cables are not in position and
are causing circuit cut off.
Adjust and reposition the brake cables.
NOTE: If other problems occur, do not attempt to disassemble the scooter on your own, please contact your authorised dealer.