20
Working torque
–. Check.and,.if.necessary,.set.the.value.of.the.working.torque.50.–.100.%.in.program.DMS2.
Tripping in end-limit positions
–. Check.and,.if.necessary,.set.the.way.of.tripping.in.the.end-limit.positions::
–. Torque
–. .position.O
–. .position.Z
–. .position.O.+.Z
End-limit positions - working stroke
–. Position.Z
.
–. Shift.to.position.Closed.either.manually.or.by.means.of.menu.Motor.in.program.DMS2.
.
–. .The.actuator.can.only.be.controlled.by.means.of.the.program.if.no.torque.is.induced..The.torque.should.be.left.
manually.
.
–. Press.push-button.Z.to.confirm.consent.with.the.record.
–. Position.O
.
–. Shift.to.position.Open.either.manually.or.by.means.of.menu.Motor.in.program.DMS2.
.
–. .The.actuator.can.only.be.controlled.by.means.of.the.program.if.no.torque.is.induced..The.torque.should.be.left.
manually.
.
–. Press.push-button.O.to.confirm.consent.with.the.record.
Autocalibration
–. .The.autocalibration.can.only.be.started.by.means.of.the.program.if.no.torque.is.induced..The.torque.should.be.left.
manually.
–. The.autocalibration.is.started.by.push-button.Start.in.program.DMS2.
–. Wait.until.the.autocalibration.is.completed;.information.on.its.course.is.signalized.next.to.push-button.Start.
Other parameters
Check.and,.if.necessary,.change.other.parameters:
Control.signal
.
4.–.20.mA.
20.–.4mA.
0.–.20.mA.
20.–.0.mA
.
2.position.
Bus
Insensitivity.
1.–.1.0.%
Function.SAFE.
Open.
Close.
Stop.
To.position.
Active.SAFE.
O.V.
230.V
Time.of.blocking.torque
in.end-limit.positions.
0.–.20.s
Position.of.blocking.torque
in.end-limit.positions.
1.–.10.%
Output.of.position.signal.
4.–.20.mA.
20.–.4.mA
Function.READY
..
Switched.off.
Warning.
Errors.
Warning.or.error
-.Combined.error.
.
Errors.or.not.. Errors.or.warning.
Torque.“O”.or.“Z”
.
remote.
or.not.remote
.
Switched.off.
Position.O.
Position.Z
.
Torque.O.
Torque.Z.
Torque.and.position.O. Torque.and.position.Z
Relay..1.–.4.
Opening.
Closing.
Motion.
Position
.
position.N.
Local.control.
Emote.control.
Control.switched.off
.
Torque.O/Z.
Motion.-.blinker
Position.Relay.1.–.4.
0.–.100.%
Note:
SAFE - input information on the error of an external device can be set so that the actuator would respond as to
its own error.
