ZPA Pečky 52 030, Mounting Instructions

Page: 29 / 52

29
Table 3
– continuation
Serial number 5 2 0 3 X . X X X X X X
Tripping torque values, setting speeds and other technical parameters are specified in Table 1 or 2 including iden-
tification. This position will include figure or letter corresponding to the required parameters.
MODACT MON, MOP, MONJ Control
MOD
A
CT
MON,
MOP
, MONJ Complete
equipment
1)
Without
position
regulator
Without position
regulator
and brake
W/O signalling, pos. transmitter and flash lamp 0 - E M
Position transmitter 1 A F N
Signalling switches 2 - G Q
Signalling switches and position transmitter 3 B H P
Flash lamp 4 - I R
Position transmitter, flash lamp 5 C J S
Signalling switches and flash lamp 6 - K T
Signalling switches, pos. transmitt. and flash lamp 7 D L U
Note:
1)
Actuators MODACT MON, MOP, MONJ Control with regulator ZP2 RE5 – figure 5 will be specified.
Letter N (MODACT MON), P (MODACT MOP), NJ (MODACT MONJ) will be specified universally for all versions.
Signalling, position transmitter, flash lamp
Local control block,
position indicator
Without local control block,
without position indicator
1 K B A
Local position indicator 2 L - -
Local control block 4 M E C
Local control block and position indicator 6 N - -
Local control block for actuators
MODACT MON, MOP, MONJ Control
7 P H D
Local control block
and position indicator for actuators
8 R - -
MODACT MON, MOP, MONJ Control
Design without
transmitter
Resistance
transmitter
Current transmitter
4–20 mA
Current transmitter
4–20 mA + source
For surrounding temperature from -25 °C to +70 °C without designation
For surrounding temperature from -40 °C to +60 °C F1
For surrounding temperature from -60 °C to +60 °C FF