6. Press F7 after selecting the target hard disks. A message which says “Clear
disk data?” will appear. If you are sure to clear the data in the selected hard
drives, press Y. (If the hard drives contain previously created RAID array,
you need to press Y to clear the data from the hard drives.)
7. After that, then Array List screen displaying the RAID array you created
will appear. If you want to set the disk array as boot device, use the UP or
DOWN ARROW key to select the array and press B. The Boot section will
show Yes.
Summary of Contents for NVIDIA MCP73U
Page 50: ...50 Technical Reference Booklet...
Page 51: ...51...
