Technical Reference Booklet
Entering the raid biOs setup
1. After rebooting your computer, wait until you see the RAID software
promptint you to press F10.
2. The NVIDIA RAID Utility –Define a New Array window appears
3. In the RAID Mode field, use the UP or Down ARROW key to select a RAID
Mode. The supported RAID modes include Mirroring (RAID 1), Striping
(RAID 0) and Stripe Mirroring (RAID 0+1), Spanning(JBOD) and RAID 5.
The following is an example of RAID 0 array creation.
4. If RAID 0(Striping) is selected, you can manually set the striping block size. in
the Striping Block field, use the UP or DOWN ARROW ey to set the Striping
Block size. The KB is standard unit of Striping Block size. We recommend
you leaving it to the default setting-Optimal(64k). The size range is from 4k
to 128k.
5. Select the hard drivers which you wish to be included in the disk array. The
Free Disks section displays the information about the currently installed
SATA hard drives. Press the TAB key to move to the Free Disks section.
Select the target hard drives using the UP or DOWN ARROW key and use
the RIGHT ARROW key to add the hard drives to the Array Disks section.
Summary of Contents for NVIDIA MCP73U
Page 50: ...50 Technical Reference Booklet...
Page 51: ...51...
