4
G31-Value series motherboard
Drive A
The
Drive A
option allows you to select the kind of FDD to install.
Halt On
Halt On
determines whether or not the computer stops if an error is detected during
power on. Use the
Page Up
and
Page Down
keys to scroll through the options or
press
Enter
to display the
Halt On
sub-menu. Use the
#
$
arrow keys to position
the selector in the option you choose. Press
Enter
to accept the changes and return
to the Standard CMOS Features menu.
q
All Errors
Whenever the BIOS detects a nonfatal error, the system stops and prompts you.
q
No Errors
System boot does not stop for any detected errors.
q
All, But Keyboard
System boot does not stop for
keyboard errors, but does stop for all
other errors.
q
All, But Diskette
The system boot does not stop for a diskette error but will stop for all other
errors.
q
All, But Disk/Key
These field are read-only and are determined by the BIOS POST.
Memory
These settings are
display-only values
that are determined by the BIOS POST
(Power-On Self Test).
q
Base Memory
BIOS POST determines the amount of base (or conventional) memory installed
in the system.
q
Extended Memory
BIOS determines how much extended memory is present during the POST.
q
Total Memory
This value represents the total memory of the system.
Summary of Contents for G31-Value series
