Zotac G31-Value series, User Manual

Page: 21 / 58

0
G31-Value series motherboard
JP2 Selection
1-2 5V power input
2-3* 5V standby power input*
Jumper Settings
This chapter explains how to configure the motherboard’s hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this
chapter whenever in doubt.
Notice :
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen
even if the frequency multiplier setting in CMOS setup is changed.
Close Open * = Default setting.
JP-CMOS Clear Jumper
JP-P/S Port 5V Standby Power Selection(Optional)
JP1 Selection
1-2* Normal*
2-3 CMOS Clear
If you want to clear the system configuration,use the JP1(Clear CMOS Jumper) to clear date