User Manual: Zopec Explore Oxygen (Ver. 03.03.2021)
Page
6
of
10
5.1 UPS Technology for Power Outages:
•
To set up this backup power mode, just keep the battery charging while running
your machine. The AC Outlet must be ON with red LED light ON.
•
When there is no power outage, the battery will run the wall power through a
Pass-through (bypass). Therefore, it does not hurt the battery life.
•
When a power outage occurs, the battery senses the Pass-through has zero
current flow and switches instantaneously to battery power. You would sleep
through the power outage uninterrupted without knowing it even occurred.
•
Note: Please verify that the % capacity stays at 100% or “FF”. If you see the
battery started to drain, then please lower your heated tube setting until the
battery capacity stays at 100% or “FF”.
•
This UPS battery is designed to stay under the bed. If you put in a drawer, make
sure it is vented. This battery comes with all safety features including over
current, over voltage, and over temp. It is safe to be on the floor. See below:
5.2 Unlimited Linking Technology:
•
To get additional machine running time, you can purchase multiple batteries and
link them together. There is no limit on how many batteries you can link together.
Essentially, you can get any amount of power you want.
•
To link 2 batteries, link up as you are recharge the first battery using the next
battery. Continue this set up to link more batteries. Please note that
the CPAP
machine must plug into the first battery
. It will draw from all batteries because
they are all linked.
•
In backup power mode, have the last battery in the link charge from a wall outlet.
•
Note: When drawing from multiple batteries, it may not draw from the batteries in
order. That is normal. The power draw is based on the path of least resistance.