Red (12V+) positive supply wire
Once.the.ground.connection.has.been.completed,.locate.a.source.of.
positive.(+).12.Volts.that.remains.constant.regardless.of.whether.the.
ignition.switch.is.in.the.on.or.off.position...Please.note:..the.(12V+).
positive.supply.wire.may.not.be.red,.please.consult.your.vehicle.
manufacturer’s.handbook.for.determining.the.correct.location.of.
this.supply.wire...A.good.location.to.find.a.constant.12V.(+).source.
is.at.the.vehicle’s.battery,.main.switch.ignition.harness.or.fuse.
box...Make.sure.you.install.the.fuse.holder.within.6.inches.from.the.
point.you.have.obtained.power...The.included.fuse.is.designed.to.
protect.the.power.supply.itself...Use.caution.if.you.are.using.a.fuse.
tap;.severe.and.costly.damage.may.occur.to.fuse.box.if.they.are.not.
used.correctly...Make.certain.the.circuit.you.tap.into.does.not.fall.
“asleep”.after.the.car.ignition.has.been.turned.off...Most.new.vehicles.
incorporate.battery.saver.circuits.which.switch.off.power.to.non-
essential.accessories.after.the.vehicle.has.been.switched.off...Consult.
the.vehicle.manufacture.shop.manual.for.location.and.descriptions.of.
these.circuits.
13
zoombak.com
Summary of Contents for Car and Family GPS Locator
Page 1: ...Car Family Locator User Guide and Installation Guide ...
Page 4: ......
Page 30: ...www zoombak com 2 4 ...