3. Mount Locator Charger
The.charger.should.be.securely.attached.to.the.vehicle,.close.to.the.
Zoombak.device...The.charger.can.be.securely.attached.using.the.
included.Velcro.set,.2-sided.tape,.zip-ties.or.sheet.metal.screw..
4. Connect Locator Charger to Vehicle Power
Source
.
USE.CAUTION.WHEN.PROBING.WIRES.IN.THE.VEHICLE..
AVOID.CHARGER.GOING.INTO.AND.AROUND.THE.AIRBAG.MODULES...
AVOID.ANY.HARNESS.TAPED.IN.YELLOW.OR.BEARING.YELLOW.“SRS”.
(SUPPLEMENTAL.RESTRAINT.SYSTEM).TAGS.
Use. wire. ties. to. secure. wiring. from. being. pulled. out. of. the. Zoombak.
Locator. and. to. ensure. that. it. does. not. interfere. with. any. vehicle.
components.
Black Wire (-) ground wire
Once.the.Zoombak.Locator.charger.is.mounted,.connect.the.black.
ground.wire.to.an.existing.factory.bolt.using.crimp-on.ring.connector..
Please.note:..the.power.wire.is.also.black,.however,.it.has.a.dotted.
white.line.with.the.white.plastic.fuse.holder.attached.to.it..The.
ground.wire.should.be.installed.first..Use.a.wire.brush.or.rotary.file.to.
remove.the.paint.from.around.the.bolt.to.allow.for.the.best.possible.
connection.to.ground...A.good.location.to.find.a.suitable.bolt.is.in.
either.the.driver’s.or.passenger’s.kick.panel...Do.not.select.a.bolt.that.
has.existing.factory.ground.wires.attached.to.it...Make.sure.the.bolt.
is.retightened.properly.after.you.are.finished...Make.sure.any.paint.
underneath.the.bolt.has.been.removed.to.provide.the.best.possible.
ground.connection...Once.the.vehicle.is.reassembled,.this.connection.
should.not.be.immediately.visible.
.
12
zoombak.com
Summary of Contents for Car and Family GPS Locator
Page 1: ...Car Family Locator User Guide and Installation Guide ...
Page 4: ......
Page 30: ...www zoombak com 2 4 ...