04
Names of P
ar
ts
Names of Parts
Front Panel
INPUT jacks
These analog signal input jacks have mic preamps.
You can connect mics, keyboards and guitars to them.
These can be used with both XLR and 1/4-inch
(balanced or unbalanced) phone plugs.
CLOCK SOURCE
indicators
These show the clock source
that is being used: ADAT,
S/PDIF, WORD CLOCK or
INTERNAL.
Level indicators
The LED lights red when the
signal clips.
Input gain knobs
Use to adjust the input gain of
the mic preamp.
Power indicator
This lights when the
is
turned on.
PHONES 1 and 2 volume knobs
Use these to adjust the
headphone volumes of the
PHONES 1 and 2 jacks.
MAIN OUTPUT level knob
Use to adjust the volume of
the audio signal output from
the MAIN OUTPUT jacks.
PHONES 1 and 2 jacks
Connect headphones to these.
Hi-Z switches
Use to switch the input
impedances of inputs 1 and 2.
Turn them on when connecting a
guitar or bass guitar.
PHANTOM switches
Set these to on to supply
phantom power to inputs 1–4 and
5–8.
1
2
3
XLR
TRS
1
：
GND
2
：
HOT
3
：
COLD
TIP
：
HOT
RING
：
COLD
SLEEVE
：
GND
Standalone mode
In standalone mode, the
can be used as an eight-channel mic preamp
and digital input/output device without being connected to a computer.
When used in standalone mode, operation is set in advance using the
mixer application.
Inputs 1 to 8
