14
Using Digital
Audio Equipment
Using Digital Audio Equipment
About Digital Audio Clock
When the
is connected to other digital audio
equipment, audio clock must be synchronized in order to transfer
audio data between them. If they are not synchronized, noise
and various other problems will occur.
To synchronize audio clock, one device must operate as the
master, which sets the reference clock, and the other must
operate as a slave.
Audio clock
Reference
clock
Synchronized
clock
Master
Slave
Digital device
The
is operating as the master, and the audio clock of the
and the other digital device are synchronized.
Connecting S/PDIF Devices
1.
Minimize the volume of output devices connected to
the
.
HINT
When connected, noise might occur until clock synchronizes.
2.
Set the same sampling rates for the
and the
connected device.
NOTE
For instructions about how to change the sampling rate of the
, see the
Reference Guide.
