44
FUNCTION
Key
Settings
Setting Range: 435 - 445 (Default value: 440)
Allows tuning the bass pitch with the [VALUE UP/DOWN] keys in the range of 435 Hz - 445 Hz.
Setting Range: 2, 3, 4
Use the [VALUE UP/DOWN] keys to set the beat for the pattern to 2 (2/4 beat), 3 (3/4 beat), or 4 (4/4 beat).
Changing the beat of an already recorded pattern is also possible, but the recorded sound will change as
follows. Proceed with care, especially when making the beat shorter.
■
Choosing a longer beat than the current beat
A blank space with the length of the additional beat is added to each measure.
■
Choosing a shorter beat than the current beat
The excess duration of each measure is cut off. Once the [FUNCTION] key is pressed to accept the
setting, it will not be possible to restore the cut-off sections.
Setting Range: 0, 1, 2, PAd (Default value: 1)
The pre-count (number of metronome ticks before the start of pattern real-time recording) can be turned
on and off, and the number of measures can be set with the [VALUE UP/DOWN] keys.
The settings have the following meaning.
0:
Real-time recording starts immediately when the [START] key is pressed.
1:
Real-time recording starts after 1 measure has been counted.
2:
Real-time recording starts after 2 measures have been counted.
PAd:
The unit goes into recording standby mode when the [START] key is pressed, and recording
starts when any pad is pressed.
Setting Range: 4, 8, 12, 16, 24, 32, 48, Hi (Default value: 16)
Sets the quantize value (shortest note) for the pattern. After selecting the item, set the value with the
[VALUE UP/DOWN] keys or the [SOUND JAMMER] slider.
The quantize setting affects the following four functions:
• Shortest note for real-time recording
• Shortest note for step recording
• Sound interval when [REPEAT/STEP] key is used together with pad for continuous
repetition
Setting the pre-count (PRE COUNT)
Setting the pattern resolution (QUANTIZE)
Tuning a bass program (BASS TUNE)
The RhythmTrak
•••
234 stores this setting for each pattern
individually.
HINT
HINT
Setting the beat of a pattern (TIME SIG)
