As opposed to drum track recording, the bass track records for the
length of which you press a pad. For example, to record the
following sequence, hold the pad to which A2 has been assigned
and the pad to which E2 has been assigned down for the length of
a quarter note each.
When the pitch assigned to pad 1 is changed, the pitch of pads 2 -
13 also changes accordingly. For example, if the E minor scale is
assigned and you shift pad 1 from "E 2" to "A 2", the A minor scale
will be assigned to the pads.
Example with A minor scale assigned to pads
25
Pattern
Recording
(Real-Time
Recording)
STEP
7
When the pitch has been assigned as desired, press the [FUNCTION] key once
more.
STEP
6
To shift the pitch of all pads, operate the [VALUE UP/DOWN] keys or the [SOUND
JAMMER] slider while no pad is pushed.
When the [REC] key is pressed during real-time recording, the
[REC] key LED starts to flash and pattern recording is suspended. In
this condition, tapping the pads will produce sound, but it is not
recorded. This is useful to check phrasing and sound before
actually recording.
HINT
HINT
STEP
8
While holding the [REC] key down, press the [START] key.
STEP
9
Tap the pads in accordance with the metronome sound.
[PAD]
Hold down
A2 pad
E2 pad
Hold down
OPEN HAT
7
CLICK VOL
CLOSED HAT
5
PRE COUNT
SNARE
3
BASS TUNE
KICK
1
BASS KEY
EXTRA 1
9
CTRL ASSIGN
EXTRA 2
11
PAD SENS
EXTRA 3
13
MIDI
TOM 3
6
QUANTIZE
TOM 2
4
TIME SIG
RIDE
10
SWING
EXTRA CYMBAL
12
SHIFT
TOM 1
2
MIX
CRASH
8
BAR LENGTH
b 2
E 4
d 3
C 4
F 3
A 3
G 3
E 3
b 3
C 3
d 4
A 2
F 4
The [FUNCTION] key LED goes out.
The [REC] key LED and [START] key LED light up and the [TEMPO]
key LED flashes. The already recorded drum tracks are played
back.