manualshive.com logo in svg

Zoom Pro 4040, Operation Manual

Share
Download
Zoom Pro 4040 Operation Manual Download Page 28

Using the FS01 

The optional foot switch FS01 can be used to switch
between the normal Play mode and the Manual mode where
effects can be individually switched on and off. 

• Turn off the 4040, and connect the FS01 to the

MANUAL connector of the 4040. 

• Turn on the 4040 and select the patch. 

• Push the FS01 once. 

This switches the 4040 to the Manual (Edit) mode. The
on/off status of individual effect modules can now be
controlled with the pedal switches 1 - 4 and the BANK 

▼

pedal. 

The pedal switches 1 - 4 and the BANK 

▼

pedal

correspond to the following effect modules: 

• BANK 

▼

pedal :

PRE 

• Pedal switch 1:

EQ 

• Pedal switch 2: 

MODULATION 

• Pedal switch 3: 

DELAY 

• Pedal switch 4: 

REVERB 

In Manual mode, selecting patches is not possible. 

• Push the FS01 once more. 

The 4040 reverts to the normal Play mode, and patch
selection is possible. 

NOTE

HINT

INPUT

4040

FS01

MANUAL

27

Application Examples for Use of the Foot Switch and Pedal Switches 1 - 4

The optional foot switch FS01 can be used for example to switch modes during a performance. 

Summary of Contents for Pro 4040






























Reviews:

No comments

Brands by name

Popular brands

Load more brands