Zoom Pro 4040, Operation Manual

Page: 23 / 29

■ MINIMUM VOLUME
This parameter controls the volume level setting between the
EQ module and the MODULATION module, when the VOL
pedal is fully raised. This is a global parameter which affects
operation of the entire 4040.
Explanation
MINIMUM VOLUME: Determines the minimum volume
level when the VOL pedal is fully raised. At a setting of 0
(zero), no sound is heard.
■ MIDI CH (MIDI Channel)
This parameter controls the channel for the MIDI signal
supplied at the MIDI OUT connector. This is a global
parameter which affects operation of the entire 4040. For
details, please refer to page 26.
Explanation
MIDI CH (MIDI Channel):
Determines the MIDI send
channel.
When you have changed a global parameter
(MINIMUM VOLUME/MIDI CHANNEL) and
want to retain the setting, simply store any patch.
This will also store the global parameter setting. If
you turn off the 4040 without storing a patch, the
global parameter setting will revert to the default
value.
■ EXP. SELECT (Expression Select)
This parameter determines which module is controlled by
the expression pedal. This parameter can be stored as part of
an individual patch.
Explanation
EXP. SELECT (Expression Select): Determines which
module is controlled by the expression pedal.
0: OFF
1: PRE
2: EQ
3: MODULATION
4: DELAY
5: REVERB
The effect of the EXP (expression) pedal depends on
which module is selected for the current patch. The
direction and intensity of the change depends on the
module settings. Edit the respective parameters and
check the results to find your desired sound.
Modules which are currently off and modules which
cannot be controlled by the EXP pedal cannot be
selected (are not displayed). When wishing to
control a module with the EXP pedal, be sure to set
it to on.
NOTE
HINT
EXP. SELECT
Parameter 0 – 5 EXP. SELECT
NOTE
MIDI CH
Parameter 1 – 16
MIDI CH
MINIMUM VOLUME
Parameter 0 – 10 MINIMUM VOLUME
22