manualshive.com logo in svg

Zoom MRS-4, Operation Manual

Share
Download
Zoom MRS-4 Operation Manual Download Page 5

Power on/off switching 

To  turn the MRS-4 on or off, proceed as
follows. 

1.

Make sure that the MRS-4 and all
other devices are turned off. 

Turn down the volume at the source
equipment, MRS-4, and monitor system. 

2.

Insert the SmartMedia card into
the SmartMedia card slot on the
front panel of the MRS-4, as
described on page 5. 

3.

Set the [POWER] switch of the
MRS-4 to ON. 

The MRS-4 starts up. 

4.

Turn the monitor system on. 

1.

Turn the monitor system off. 

2.

Set the [POWER] switch of the
MRS-4 to OFF.

The indication "POWEROF" (power off)
appears on the display, and the MRS-4 shuts
down. 

Always follow the above procedure, and do not
remove the SmartMedia card without first turning
off the power. Otherwise data may be destroyed. 

◆

Caution 

◆

When operating the unit with the AC
adapter, always use the [POWER]
switch of the MRS-4 to turn the unit
on and off. Never disconnect the AC
adapter while the card access
indicator is lit. Otherwise data may be
destroyed. 

Operating the unit on
batteries 

The MRS-4 can be powered from batteries
(not supplied). Follow the steps below to
insert the batteries. 

1.

Turn  the unit over and open the
battery compartment cover. 

2.

Insert four fresh IEC R6 (size AA)
batteries into the battery
compartment. The use of alkaline
batteries is recommended. 

3.

Close the battery compartment
cover. 

If the indication "[

]" flashes while the unit

is powered from batteries, the batteries are
exhausted. Replace the batteries as soon as
possible. 

N

OTE

Four IEC R6 (size AA) batteries

MRS-4 underside

N

OTE

Turning power off

Turning power on

Connections

ZOOM 

MRS-4

9

ZOOM 

MRS-4

Connections

8

Connections 

When a line level signal such as that from a CD player or rhythm machine 
is connected to the AUX IN [L/MONO]/[R] jacks, it will be output from 
the MASTER [L]/[R] jacks together with the mixed playback signal from 
the tracks of the MRS-4. For a stereo device, use both the [L/MONO] and 
[R] jacks. For a mono device, use only the [L/MONO] jack. 

Connect the monitor system 
or master recorder to the 
MASTER [L]/[R] jacks. 

To power the MRS-4 from an 
AC outlet, be sure to use only 
the AC adapter ZOOM AD-
0006 (available separately). 
Using another kind of AC 
adapter may result in damage.

To  synchronize operation of 
the recorder section of the 
MRS-4 with another MIDI 
device, connect the [MIDI 
OUT] connector of the MRS-
4 to the MIDI IN connector 
of the other device

To  monitor with headphones, 
plug them into the [PHONES] 
jack. This jack carries the 
same signal as the MASTER 
[L]/[R] jacks

Headphones

Multi-effect such 
as 505II 

Mic

Guitar 

Monitor system 

Master recorder 

Rhythm machine, 
MIDI sequencer or 
other MIDI device

AC adapter

CD player or other external source component

Loop the cable of the AC
adapter around the hook as
shown in the diagram before
connecting it to the [DC 9V]
jack. This will prevent the plug
from being pulled out if the
cable is accidentally pulled.

Summary of Contents for MRS-4


































Reviews:

No comments

Brands by name

Popular brands

Load more brands