manualshive.com logo in svg

Zoom GFX-4, Operation Manual

Share
Download
Zoom GFX-4 Operation Manual Download Page 7

1.

Verify that the AC adapter, instrument, and

amplifier are correctly connected to the GFX-4. 

2.

Turn the system on in the order GFX-4 

➝

amplifier. 

3.

While playing your instrument, adjust the volume

control on the amplifier, the level control of the

instrument, and the MASTER LEVEL knob of the

GFX-4 to a suitable position. 

7

ZOOM GFX-4

Preparations 

Power Up

Preparations

1.

Immediately after turning on the GFX-4, press

the AMP SIM key. 

The AMP SIM key LED lights up, showing that amp

simulator setup is possible. 

2.

Use the 

/ 

keys to call up the indication

"AMPTYP" on the display, and use the 

/ 

keys to select the amp simulator type. 

The following AMPTYP settings are available. 

oF:

Amp simulator is turned off. (CABTYP and

CABDPT parameters are also inactive.) 

Cb:

Conventional combo amp simulation 

bC:

Bright combo amp simulation 

St:

Stack amp simulation 

The current setting can be checked on the

GROUP/BANK indicator. 

3.

Use the 

/ 

keys to call up the indication

"CABI" on the display, and use the 

/ 

keys

to select the cabinet simulator type. 

The following CABTYP settings are available. 

oF:

Cabinet simulator is turned off. (CABDPT parameter

is also inactive.) 

C1:

Combo amp cabinet (12" speaker x 1) 

C2:

Combo amp cabinet (12" speaker x 2) 

St:

Stack amp cabinet (10" speaker x 4) 

WL:

Simulates the sound of a stacked array of St type

cabinets. 

4.

Use the 

/ 

keys to call up the indication

"CABDPT" on the display, and use the 

/ 

keys to adjust the intensity of the cabinet

simulator effect. 

The setting range is 0 - 10. Higher values result in

stronger cabinet sound. 

5.

When the setting is complete, press the STORE

key two times. 

The amp simulator setting is stored. This setting applies

to all patches. 

Using the Amp Simulator 

When the GFX-4 is connected to a hi-fi system or multi-track recorder (MTR), set up the amp simulator to match your

preferences. 

Summary of Contents for GFX-4

































Reviews:

No comments

Brands by name

Popular brands

Load more brands