manualshive.com logo in svg

Zoom GFX-4, Operation Manual

Share
Download
Zoom GFX-4 Operation Manual Download Page 22

DRIVE module 

22

ZOOM GFX-4

Effect

Types

a

nd

Parameters

This module contains mainly distortion type effects such as Fuzz and Overdrive simulating conventional

compact effects. In addition, the module also features preamp effects and an acoustic guitar simulator. 

TYPE 1

ACOSIM

TOP

BODY

LEVEL

 (Acoustic Simulator)

 (Scream)

 (Overdrive)

 (Dist)

 (Distortion)

 (Fuzz 

π

)

 (Lead)

 (Metal Z)

(ZOOM Metal Driver 1) 

(US Blues) 

(British Drive) 

1 – 10

1 – 10

1 – 10

Changes the sound of an electric guitar to resemble that of an acoustic guitar.

Higher values for this parameter result 
in a stronger acoustic guitar character.

Higher values for this parameter result 
in stronger instrument body sound. 

Adjusts the output level of the module. 

TYPE 2

SCREAM

Simulates a vintage overdrive that was extremely popular in America as a booster. 

TYPE 3

OD

Simulates the "classic" overdrive tone.

TYPE 4

DIST +

Simulates a vintage distortion unit that pioneered distortion sound. 

TYPE 5

DIST

Hard distortion British "Stack Style".

TYPE 6

FUZZ P

Vintage "60's" fuzz simulation, rough distortion and superb tone. 

TYPE 7

LEAD

Parallells the "ZOOM" lead guitar sound, modern with outstanding drive.

TYPE 8

METALZ

Simulates intense Heavy Metal dual gain distortion. 

TYPE 9

ZMD-1

Ultra high gain, metal super distortion, over the edge. 

TYPE 10

USBLUE

Full range vintage amp distortion, picking intensity varies the overdrive.

TYPE 11

BRDRV

The "British Invasion" vintage tube sound that started it all.

TYPE 4

A-WAH

SENS

RESO

POSI

(Auto Wah) 

(Slow attack) 

-10 – -1, 1 – 10

1 – 10

bF, AF

This is an auto wah effect which varies the effect depth according to the picking intensity. 

Adjusts the sensitivity. Positive values 
shift the peak upwards and negative 
values shift it downwards. 

Adjusts the prominence of the wah 
effect. 

Selects the COMP/OD/ENV module and 
DRIVE module connection sequence. The 
following two setting are available. 
   

bF:

 COMP/OD/ENV

➝ 

DRIVE 

   AF: 

DRIVE

➝ 

COMP/OD/ENV 

TYPE 5

SLOW-A

TIME

CURVE

POSI

1 – 10

1 – 4

bF, AF

This effect adds a soft attack to each note, depending on the picking intensity. 

Adjusts the transient rate of the sound. 

Adjusts the transient curve of the sound. 

Selects the COMP/OD/ENV module and 
DRIVE module connection sequence. The 
following two setting are available. 
   

bF:

 COMP/OD/ENV

➝ 

DRIVE 

   AF: 

DRIVE

➝ 

COMP/OD/ENV 

Summary of Contents for GFX-4

































Reviews:

No comments

Brands by name

Popular brands

Load more brands