Zoom GFX-4 Operation Manual Download Page 25

Page: 25 / 32

ZOOM GFX-4

Effect

Types

Parameters

(Delay)

(Phaser)

TYPE 7

DELAY

TIME

MIX

1 – 50

0 – 50

0 – 10

This is a delay effect with a maximum delay time of 500 milliseconds.

Adjusts the delay time in 10-ms steps.

Adjusts the feedback amount. Higher
values result in an increased number of
delayed sound components.

Adjusts the effect sound mixing ratio.

TYPE 9

RINGMD

POSI

FREQ

BAL

(Ring Modulation)

bF, AF

1 – 50

0 – 50

This effect applies amplitude modulation to the input signal, resulting in a metallic sound character.

Selects the connection position of the
MODULATION module. The
following two settings are available.

bF:

Before the DRIVE module

AF:

After the EQUALIZER module

Determines the frequency of the
modulation signal.

Adjusts the mixing balance between
effect sound and original sound. Higher
values result in stronger effect sound.

TYPE 10

PITCH

PIT

TONE

BAL

(Pitch Shifter)

(Detune)

-12, -11... -1, 1, 2... 12, 24

0 – 10

0 – 50

This effect varies the pitch in the range from 1 octave down to 2 octaves up.

Adjusts the pitch shift amount in
semitone steps.

Adjusts the effect sound character.

Adjusts the mixing balance between
effect sound and original sound. Higher
values result in stronger effect sound.

TYPE 11

DETUNE

DEPTH

TONE

MIX

-10...-1, 1...10

0 – 10

0 – 50

This effect mixes a slightly pitch-shifted component to the original sound, resulting in a chorus effect with only slight
modulation.

Adjusts the effect sound detuning
extent.

Adjusts the effect sound character.

Adjusts the effect sound mixing ratio.

TYPE 12

PDLWAH

POSI

FREQ

LEVEL

(Pedal Wah)

bF, AF

1 – 50

Simulates a typical pedal wah with changing effect and feeling according to the pedal angle.

Selects the connection position of the
MODULATION module. The
following two settings are available.

bF:

Before the DRIVE module

AF:

After the EQUALIZER module

Adjusts the wah center frequency.

Adjusts the volume level.

TYPE 8

PHASE

POSI

RATE

COLOR

bF, AF

1 – 50

1 – 4

Simulates a phaser with silky smooth sound not attained by other models.

Selects the connection position of the
MODULATION module. The
following two settings are available.

bF:

Before the DRIVE module

AF:

After the EQUALIZER module

Adjusts the modulation rate.

Selects the character of the phase sound.

■

Summary of Contents for GFX-4

































Search results

Summary of Contents for GFX-4

Reviews:

Brands by name

Popular brands

Zoom GFX-4, Operation Manual

Search results

Summary of Contents for GFX-4

Reviews:

Brands by name

Popular brands