Zoom F3 Operation Manual Download Page 25

Page: 25 / 105

Connecting input equipment

Connecting mics and other equipment to Inputs 1 and 2

The F3 has 2 inputs (1 and 2) that can be used to record to corresponding tracks. Mics and other equipment
can be connected to Inputs 1 and 2 and recorded to corresponding tracks.

■

Connecting mics

Connect dynamic and condenser mics with XLR plugs to Inputs 1 and 2.

• When connecting mics, set the Input Source to Mic.

(→

Setting input sources

)

• Phantom power (+24 V/+48 V) can be supplied to condenser mics.

(→

Setting input sources

)

■

Connecting line level equipment

Mixers and other line level equipment can be connected using cables with XLR plugs.

• When connecting line level equipment, set the Input Source to Line.

(→

Setting input sources

)

• Direct input of passive guitars and basses is not supported. Connect these instruments through a mixer

or eﬀects device.

Summary of Contents for F3










































































































Search results

Summary of Contents for F3

Reviews:

Related manuals for F3

Brands by name

Popular brands

Zoom F3, Operation Manual

Search results

Summary of Contents for F3

Reviews:

Related manuals for F3

Brands by name

Popular brands