manualshive.com logo in svg

Zoom F3, Operation Manual, Page: 100 / 105

Share
Download
Zoom F3 Operation Manual Download Page 100

Appendix

Troubleshooting

If you think that the F3 is operating strangely, check the following items first.

Recording/playback trouble

There is no sound or output is very quiet

• Check the orientation of the mics or the volume settings of the connected equipment.
• Confirm that the headphone volume and line output level are not too low. 

(→

 

Monitoring input/playback

sounds

, 

Adjusting line output levels (playing test tones)

)

Sound from connected equipment or inputs cannot be heard or is very quiet

• Increase the magnification of input signal waveforms to amplify their sound when monitoring. 

(→

 

Waveforms shown when recording

）

• If a CD player or other equipment is connected to an input jack, raise the output level of that device.
• Check the input signal monitoring settings. 

(→

 

Monitoring input/playback sounds

, 

Adjusting line output

levels (playing test tones)

)

• Check the phantom power settings. 

(→

 

Setting input sources

, 

Changing phantom power voltage

)

Recording not possible

• Confirm that the REC LED is lit red. 

(→

 

Recording

)

• Confirm that the microSD card has open space. The time available for recording can be checked on the

screen when recording is paused. 

(→

 

Home Screen

)

• Confirm that a microSD card is loaded properly in the card slot. 

(→

 

Inserting microSD cards

)

• Confirm that the input source setting is not “Off”. 

(→

 

Setting input sources

)

Recorded sound cannot be heard or is very quiet

• Confirm that the input source setting is correct for the connected equipment. 

(→

 

Setting input sources

)

100

Summary of Contents for F3










































































































Reviews:

No comments