5
•
At
Wireless Operation
, select
¾
AP
if you are using the AP+4 as a Router/Access
Point or a Repeater.
¾
Client
if you are using the AP+4 as an Ethernet
Client.
¾
WDS
in the unlikely event that you want to use the
AP+4 as a repeater in WDS (
W
ireless
D
istribution
S
ystem) mode.
¾
AP+WDS
in the unlikely event that you want the
AP+4 to operate as both an Access Point and a
repeater in WDS mode.
•
At
Network Type
(available only if the AP+4 is operating
as a Client) select Infrastructure (most users) or Ad Hoc.
•
At
SSID
, enter the name of your wireless network. All
wireless devices on your wireless network should use
the same SSID. You may have already assigned one to
another device, and in that case use the same SSID
here. If you haven’t assigned one already, you can
create a new SSID now. We suggest that you make it at
least 8 letters and numbers and avoid a name that
reveals your individual or company name or your street
address. (The SSID is case-sensitive.)
•
At
Channel Number
(available only in the unlikely event
that you selected Ad Hoc channel as your Network
Type), select a channel number that isn’t being used by
another nearby network. If you are unsure which channel
to use, try Channel 6.
•
Select
Enable MAC Clone
in the unlikely event that you
want to use the MAC address of a device in the network
instead of the AP+4’s MAC address.
•
Enable Universal Repeater Mode
(unavailable)
¾
SSID of Extended Interface
(unavailable)
Click
Next
to continue.
