type
user
for User Name and
password
for Password, each in
lower-case letters). Click
OK
.
3
On the
ADSL Setup
page, click the
Wireless
icon
at the
top of the screen to open the
Wireless Setup
page.
4
On the
Wireless Setup
page, enter a new channel. If possible,
this channel should be 5 channels away from other strong
channels in use in your area. The default channel is 10.
5
Be sure to click
Save,
then
Write Settings to Flash
after you
change the channel. All devices connecting wirelessly to the
X6v will automatically switch to the new channel.
Your basic security setup is complete. Please see the following
sections to configure 802.1x Authentication, a Wireless
Distribution System, and Wireless MAC Filtering.
Setting Up Security Using WPA2
or WPA
WPA2 and WPA use a
passphrase
that you choose and enter on
the X6v and other wireless devices on the network to set up
security. To use WPA2 or WPA,
all
of the wireless devices on your
network must support that encryption method.
1
Check to make sure that all other clients that you plan to put on
the network support WPA2 or WPA
.
If they do not, return to
Setting Up Security Using WEP
on page 29 and follow the
instructions.
2
Click the
Wireless
icon
in the
Zoom Configuration
Manager
to open the
Wireless Setup
page. Go to
Encryption
and select
WPA2
or
WPA
from the drop-down menu. A new
field labeled
WPA Passphrase
will open directly below the
Encryption
box.
Chapter 3: Setting Wireless Security
33
