ADSL Half-Bridge Modem
Quick Start
Your ADSL half-bridge modem comes with a power cube, Ethernet cable, phone
cord, ADSL micro-filter, and software CD.
To complete the installation, you need the following:
•
An ADSL-enabled telephone wall jack
to plug the half-bridge modem
into.
•
A Windows XP/2000/Me/98 computer
that has an Ethernet port. This is
used to install the modem’s software and to configure the modem.
When the installation is complete, the half-bridge modem will connect to an
ADSL-enabled phone jack and to a Windows computer or router.
Installing the Modem Software
1
11
1
Do not plug the modem into your computer or router. You need to install
the software first.
2
22
2
Turn on your Windows computer.
3
33
3
Insert the supplied CD into the CD drive of your computer. The CD should
start automatically and the
Language Selection
screen should appear. Select
your language. (If the CD does not start automatically, on the desktop, click
the
Start
button, click
Run
, and then type
D:\setup.exe
, where
D
is the
letter of your CD drive.)
4
44
4
From the
Main Menu
, click
Installation Wizard
then
ADSL Half-Bridge
Modem
. The software installation will begin. Follow the prompts.
5
55
5
When the installation is complete, click
Finish
then click
Exit
.
6
66
6
Remove the CD from your CD drive then shut down the computer.
Congratulations!
You have installed the software. Continue with
Installing the
Hardware
.
Installing the Hardware
1
11
1
Shut down your computer.
2
22
2
Plug the included ADSL micro-filter into an ADSL-enabled phone jack.
Then plug the modem’s phone cord from the modem’s
ADSL
jack to the
modem jack of the micro-filter. If you’d like you can plug a phone into the
PHONE
jack of the micro-filter.
3
33
3
Plug one end of the supplied Ethernet cable into the modem’s
ETHERNET
port and plug the other end into your computer’s Ethernet
port.
4
44
4
Plug the modem’s power cube into (
PWR
) jack and the other end into a
“live” power strip or wall outlet.
5
55
5
Turn the modem on with its
ON/OFF
button. The
PWR
light on the front
panel of the modem will become solid, and the
LINK
light will blink once.
6
66
6
Turn the computer on.
Congratulations!
You have installed the hardware. Now continue with
Getting
Connected
.
