manualshive.com logo in svg

Zoom 4575, User Manual

Share
Download
Zoom 4575 User Manual Download Page 28

0 

A status report is not requested. 

1 

A status report is requested 

 

The 

User Data Header Indicator

 (UDHI) is used to indicate if the user data field 

includes a 

User Data Header

. A User Data Header is used for binary content such as 

ringtones, operator logos, and WAP Push or it is used for concatenated SMS messages 
to allow longer SMS messages to be sent. The settings for UDHI are: 

0 

The User Data field contains only of the SMS message 

1 

The User Data field contains a User Data Header and the SMS 
message 

 

The 

Reply Path

 bit is used to tell the receiver of the SMS message to use the same SC 

that the message was sent by when replying to the SMS message. This was originally 
implemented to allow the reply message to be charged to the original sender because it 
goes through the sender’s service center. If you plan on enabling reply path you should 
check with your carrier to ensure it is supported. 

The 

Reply Path 

settings are: 

0 

Reply Path is not enabled. 

1 

Reply Path is enabled. 

 

To create a 

PDU Type

 for sending an SMS message (an SMS-Submit) that accepts 

duplicate messages with no validity period, no status report, no user data header and no 
reply path, which are all common settings, you use the following values for PDU type: 

Reply 

Path 

User 
Data 

Header 

Indicator 

Status 

Report 

Request 

Validity Period 

Format 

Reject 

Duplicates

Message type 

Indicator 

0 0 0 0 0  0  0 1 

 

 

28

Summary of Contents for 4575

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands