Recording
Adjusting input gain and sound quality
Adjust input gain and sound quality so that the levels being recorded neither cause distortion nor are too
low.
Tap track buttons (
/
/
/
) on the Home Screen to open their individual settings screens.
Adjusting mic input (tap
/
)
The following mic input settings can be made.
Mic Preamp settings
Tone adjustment
Comp/DeEss settings
■
Making mic preamp settings
Adjust the input gain, and turn the Low Cut and Limiter on or off.
Limiter setting
When on, the limiter can prevent
distortion by reducing input signals that
have excessively high levels.
Input level meter
Low Cut setting
When on, this can cut low frequencies to
reduce the sound of air conditioning, wind,
vocal pops and other noise.
Input gain adjustment
Slide to adjust so the input level meter is
in the “Good” range.
HINT
•
The level increases when the mic and the speaker’s mouth are close and decreases when they are far
apart. When recording, maintain the same distance between the mic and the speaker’s mouth that was
used when the input gain was adjusted. (The standard distance between mic and mouth is 10–20 cm.)
•
The input gain adjustment will automatically be reset when the INPUT SELECT switch is changed.
32
