1 Installing Your Cable Modem
13
4
Restart your computer.
You should see a dialog box similar to the one below.
Note:
If this dialog box does not display automatically, go to
Start |Programs |Zoom Cable Modem |Cable Modem
Monitor
.
Select your computer’s
Ethernet NIC card
from the drop-
down list and click
Next
.
5
The following dialog box displays.
Click
Restart System
.
The modem starts an automated power-up process that is de-
scribed on page 14.
Note:
The Resource Checker, User Manual, and supplementary
software are also installed on your computer during this
installation procedure. For removal instructions, see page
23.
