PAGE 6
Assemble the Tripod
4. Insert the bolt through the tripod
head and legs so that it extends
out the other side, as shown in
Diagram 4. Align the bolt so the
square part of the bolt head fits
into the slot in the tripod body.
5. Install the spacer and nut onto the
end of the bolt and tighten the nut
with a wrench to clamp the legs
firmly in position.
DIAGRAM 3
TRIPOD ASSEMBLY
The tripod requires simple assembly.
1. Remove the tripod clamping bolt,
spacer, and nut, which are in a bag
which is taped to the tripod legs.
2. Make sure the legs are seated to
full depth in the tripod head. They
should reach the plastic top cap.
3. Spread the two front legs of the
tripod so that the three legs form
equal angles as shown in Diagram 3.
The legs are in the proper position
when the holes in the legs line up
with the hole through the tripod
mounting head.
2
DIAGRAM 4
INSERT BOLT IN TRIPOD
Summary of Contents for ZS 720
Page 1: ......
