PAGE 4
Essential Maintenance
During long-term storage, the battery
should remain permanently connected
to the charger and the charger plugged
into a power source. A microprocessor,
inside the machine, monitors the
battery and maintains a full charge.
These simple maintenance procedures
will greatly extend the lifetime of
your machine and assure optimum
performance.
Cleaning the Barrel
Grit transferred from the balls into
the barrel will shorten the life of the
cup and barrel.
Clean the cup and barrel after
each use as described on page 25.
Help keep the machine clean by
knocking excess dirt and debris off
balls before loading them into the
machine.
Cleaning the Optical Sensors
Optical sensors detect the ball and
measure its speed. The sensors are
located on either side of the barrel
just inside the ball scoop.
Clean them with a moist cotton swab
after every few practice sessions,
as described on page 25.
DIAGRAM 1
CHARGING THE BATTERY
Charging the Battery
To prevent shortening the life of
the battery, keep it fully charged
by consistently:
recharging the battery promptly after
each use as described on page 6.
storing the pitching machine in a
cool, dry place (preferably below 72
°
F)
Even if it’s only partially discharged,
always recharge the battery to its
full capacity.
You must recharge the battery
promptly after every use or its life
will be severely shortened.
Summary of Contents for ZS 720
Page 1: ......
