Zoofari ZTPS 6 C1, Operating Instructions And Safety Instructions

Page: 14 / 86

Zoofari ZTPS 6 C1
12 - English
When you have finished cutting/trimming or if you want to change an attachment comb (3, 4, 5,
6), move the on/off switch on the side of the pet hair clippers (1) to the "OFF" position to switch off
the pet hair clippers (1) and remove the mains plug from the socket.
9. Cleaning and care
DANGER! Remove the mains plug from the socket each time you want to clean the pet
grooming set.
DANGER! Never immerse the device in water or other liquids.

Remove the respective attachment comb (3, 4, 5, 6) if attached. You can clean the
attachment combs (3, 4, 5, 6) with water and soap. Then dry these well.

You can wipe the housing of the pet hair clippers with a slightly damp cloth, but never use
corrosive cleaners.

Remove hairs from the shaving head only with the cleaning brush (8). The shaving head is set
by the manufacturer to produce an optimal cutting result. For this reason, the cross-head
screws on the shaving head must not be loosened.

The shaving head must not be cleaned with water or other liquids, except medical alcohol!

If the device is used regularly, the shaving head should be oiled occasionally. Use the
supplied blade oil (7) for this purpose. Spread a maximum of 1 or 2 drops of blade oil (7)
on the blade area of the shaving head. Remove excess oil with a dry cloth.

Store the device in a dry and dust-free place, preferably in the storage case (10). Place the
blade cover over the shaving head when storing the device. You also have the option of
hanging up the pet hair clippers (1) via the loop attached to the cable.