9-TRANSMISSION ASSEMBLY
44
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
ZT158MJ transmission mechanism sub-components
1
2
1050256-003000 ZT158MJ drive spindle sub-components
1
3
1050256-004000 ZT158MJ transmission countershaft sub-components
1
4
1050656-001000 ZT158MJ variable speed spindle fork
1
5
1050651-006000 ZT154FMI variable speed spindle fork shaft
1
6
1050656-003000 ZT158MJ shift drum
1
7
1050656-002000 ZT158MJ shift fork
2
8
1050656-011000 ZT158MJ shift fork shaft
1
Fig.1 TRANSMISSION
ASSEMBLY
Gear shifting and transmission mechanism
components-1
PROCEDURE:
●
Remove the main shaft shifting shaft
⑸
and the counter shaft shifting shaft
⑻
of the transmission mechanism
sub-component
⑴
, remove the main shaft shifting fork
⑷
and the two counter shaft shifting forks
⑺
, then the
transmission mechanism can be divided into components
⑴
, main shaft sub-components
⑵
, The secondary
shaft sub-component(3) remove from the left box.
CAUTION:
●
When installing the shift fork, the side with letters on the shift fork faces the right crankcase.
●
One end of the spindle shift fork is placed in the slot of the third and fourth gears of the spindle, and the other
end is placed in the groove of the transmission drum profile. The specific position is shown in Picture.
●
The countershaft shift fork near the right crankcase is placed in the countershaft fifth gear slot, and the
countershaft shift fork near the left crankcase is placed in the countershaft sixth gear slot.
