7- LEFT CRANKCASE ASSEMBLY
27
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
2
1251500-041000 10.3×20×2 gasket
1
3
1051056-002000 ZT158MJ magneto rotor clutch parts
1
4
1251201-001094 M5×15
－
5# Hexagon socket screw(oxidized black)
2
5±1.5N.m
5
1050956-001000 ZT158MJ crankshaft position sensor
1
Fig.1 LEFT CRANKCASE
ASSEMBLY
ZT158MJ magneto rotor, crankshaft position sensor
PROCEDURE:
●
Fix the magneto rotor
⑶
, use a 14# sleeve to remove the bolt
⑴
, remove the washer
⑵
, use M16, 1.5mm
pitch, 40mm length to pull out the magneto rotor
⑶
.
●
Use a 5# Allen key to remove the two bolts
⑷
, and remove the waterproof rubber sleeve
①
on the crankshaft
position sensor
⑸
line from the box, and then the crankshaft position sensor
⑸
can be removed.
●
Clean up the remaining sealant on the joint surface.
CAUTION:
●
When installing the bolt
⑷
, apply thread fastening glue evenly on the thread.
●
The waterproof rubber sleeve on the crankshaft position sensor
⑸
line should be coated with sealant on the
mounting joint surface.
●
When installing the magneto rotor(3), the key slot
②
should be aligned with the semicircular key
③
on the
crankshaft.
1
1251100-064094 M10×1.25×45 hex flange bolt(10.9 grade / black
oxide)
1
60±5N.m
