MEYERTECH DIVISION
ISSUE 05
Page 8
4.2 KEY TABLES
4.2.1 ZVK-007 KEY TABLE
The following
ZVK-007
keys are used to configure the Receiver.
ENT
Proceed to the selected option. Also used to Abort Endstop and Preset
Positioning.
HOLD
Used to Save Endstop and Preset positions.
MODE/SHIFT
Toggle between Alphabetic and Numeric Keys.
SPACE
Toggle between options enclosed within quotes. E.g. [ option ].
DEC
Toggles between Upper and Lower Cases when entering Text.
<<
Used to delete text characters to the left of the cursor position.
>>
Used to delete text characters at and to the right of the cursor position.
4.2.2
ZVK-008 KEY TABLE
The following
ZVK-008
keys are used to configure the Receiver.
#
Proceed to the selected option.
S
Used to Save Endstop and Preset positions.
X
Used to abort Endstop and Preset positions.
SPACE
Toggle between options enclosed within quotes. E.g. [ option ].
DEL
Backspace delete.
HOME
Press to access joystick control when controlling PTZF.
4.3 HEAD FORMATTING
It is important to configure the following ZVR-510 parameters in the following order before attempting
to configure any other parameters. This is only required if the Pan and Tilt head or lens is fitted with
feedback pots.
1. Feedback Pots (Head Functions Menu).
2. Check joystick control. Make any corrections to joystick control within the PTZF Swap Menu
(Head Functions Menu).
3. Set the End Stops for Pan, Tilt, Zoom and Focus (optional).
4. Set Head Inertia and Drive Level for Slow Speed control to suit the Pan & Tilt Head being used.
