MEYERTECH DIVISION
ISSUE 05
Page 7
4. CONFIGURATION
The ZVR-510 should now be configured by logging onto the receiver from a ZVK-007 keyboard and
following the On Screen Menus.
4.1 LOGGING ONTO THE ZVR-510
4.1.1 LOGGING ON FROM THE ZVK-007 KEYBOARD
Access to Telemetry Receiver Configuration is achieved by logging on to the SUPERVISOR LEVEL
of the keyboard.
1. Log On to the ZVK-007 at Supervisor Level.
2. Use the
MODE
Key to step through the Menu options to
ZVR CONFIG
Select using the
ENT
key.
3. Use the
MODE
Key to step through the various receiver options to ZVR-510. Select using the
ENT
key.
4. Press the
PROG
Key to enter the On Screen Display Menu system. ZVK-007 now enters TALK
mode with the ZVR-510 Receiver.
5. The Right Hand Joystick control is used to navigate the OSD Menu System. The current
selected option is indicated by flashing text.
4.1.2 LOGGING ON FROM THE ZVK-008 KEYBOARD
Access to Telemetry Receiver Configuration is achieved by logging on in the following manner.
1. Ensure PTZ mode is off. (Key ‘U’, LED=OFF)
2. Type
∗
ZVR#. ZVR-510 enters the On Screen Display Menu system. ZVK-008 now enters
TALK mode with the ZVR-510 Receiver.
3. To navigate the OSD Menu System, select the option by pressing the appropriate upper case
character. The selected option is indicated by flashing text. Confirm by pressing #.
4. After exiting from the ZVR-510 menus type
∗
Q to exit TALK mode with the ZVR-510 Receiver.
