MEYERTECH DIVISION
ISSUE 05
Page 15
IMPORTANT
: At this point, the ZVK-008 is still in communication with the ZVR-510 and must be
logged off in order to resume normal operation.
2. After exiting from the ZVR-510 menus type
∗∗
Q #
to exit TALK mode with the ZVR-510
Receiver.
5. DIAGNOSTICS
There are two forms of system diagnostics supported on the ZVR-510.
5.1 SELF TEST
By pressing and holding the Self Test button for approximately three seconds, the ZVR-510 will enter
a Self Test Mode.
The unit will exercise Pan, Tilt, Zoom, and Focus functions.
5.2 ON SCREEN DIAGNOSTICS
Log On to the ZVR-510 at Supervisor Level and select ZVR CONFIG using the MODE key. Step
through the Receiver options to ZVR-510. Press the
F1
key to Enable/Disable the On Screen
Diagnostics. Only available through ZVK-007 keyboard.
Once this facility has been enabled, the Preset Feedback Values will remain on the Monitor display
until disabled through the supervisor mode.
The displayed Feedback Values are continually updated giving the user a quantitative measure of
the Camera’s Pan, Tilt, Zoom and Focus performance.
Preset Feedback Values
Pan
:123
Zoom
:432
Tilt
:876
Focus
:457
Camera 1
Sector 2
