ZoneVu ZoneVu ZVK-77D, User Manual, Page: 32 / 41

ZVK-77 User and Configuration Manual Issue 08 Page 32 of 41
ZVR Config
The ZVK-77 fully supports the configuration of the Meyertech ZoneVu range of receivers.
Description Default
Type Select the type of ZoneVu receiver to configure. ZVR-500 (obsolete), ZVR-x10 or ZVR-
x30.
ZVR-x30
Start config Start the configuration. The receiver at this point will display its OSD menu
Change monitor Selects the new user monitor. The next numeric entry followed by Enter will change the
current monitor.
Pressing the Enter key without a number defaults the current monitor to the default spot
monitor configured in the setup menus.
Select camera Selects the new current camera. The next numeric entry followed by Enter will change
the current camera.
Select site Selects the new current site. The next numeric entry followed by Enter will change the
current site.
Site 0 is always the operators local site.
Toggle pot
display
The receiver will display its potentiometer feedback values on the OSD to assist in
installation.
Note:
On starting configuration a different menu will be displayed on the keyboard depending on the type of receiver being
configured.
ZVR-x30 receivers use softkeys or joystick for menu navigation, and numeric keys for number entry.
ZVR-x10 receivers have a range of editing keys available, as well as the numeric keypad, clear & enter keys and a text entry
screen. Menu navigation is done using the joystick.
ZVr-x00 receivers use single character, or number selection from the numeric keypad, followed by enter to navigate the
menu. Joystick movement is enabled is some parts of the menu by the Home key.
Matrix Config
The ZVK-77 fully supports the configuration of the Meyertech series 2 and series 328 range of video matrices.
Description
Enter text Select to enter text
Down Menu navigation
Enter Menu selection
The numeric keys are also used for number entry.
On entering this menu the matrix will automatically go into configuration mode and display a menu on its OSD.