ZoneVu ZoneVu ZVK-77D, User Manual, Page: 28 / 41

ZVK-77 User and Configuration Manual Issue 08 Page 28 of 41
Delete user Delete the currently highlighted user
Login lockout If enabled the operator gets 3 attempts to correctly login. If the operator fails then the
keyboard must be powered on for 10 minutes before another logon can be attempted.
Off
Edit user menu
Description Default
Edit login name Edit the new login name. 20 chars. max.
Access level The access level of the new login - user, manager or engineer. A user can not
configure a user level higher than their own.
User
Priority The priority level of the new login – 1 to 9 1
Password The password for the user. Up to 20 chars, numbers, letters or symbols. 9999
LH Mode Left Handed Mode – On/Off
See section ‘
Setting up Left Handed User Compatibility’
Off
•
User Interface Setup
Description Default
Screen colour
The display colour. Either black screen with white text, or white screen with black
text.
White
Screen timeout A screen timeout can be selected. If no user activity is detected then the screen will
blank after the specified number of seconds. Setting a time of 0 seconds disables
the screen timeout.
300 s
•
Custom Menu Setup
Custom menu setup is an option, which configures the look and feel of each operational menu by login level type ie
User, Manager or Engineer. This is a useful feature as it allows both the access and priority to be set by operator
type. See the Softkeys section of this document for the default configuration of the different modes.
Description Default
Login level Select the required operator level – user, manager or engineer User
Insert new item Insert a new command, at the point before the currently highlighted command
Insert macro Insert a previously defined macro. The macro is appended at the end of the list
Move up Move the highlight bar up through the command list.
Move down Move the highlight bar down through the command list.
Delete item Delete the currently highlighted command.
Revert to factory
setting
Reset the current menu to its default setting.
Each page of the menu can hold 9 commands. Blanks can be inserted instead of commands to assist in the
functional partitioning of the commands.
•
Misc. options
General configuration settings that can help tailor a keyboard to a specific installation.
Description Default
Periph. Type Early ZoneVu peripheral drivers used a different protocol. Select this only following advise
from Meyertech Technical Support
New
Nudge mode Controls the operation of the nudge keys. These keys generate either zoom or focus
nudge commands. Can be set to either
Inverse J-stick
– nudge key opposite of joystick
twist action – or – As J-stick – nudge key same as joystick twist action.
Inverse J-stick
Spot monitor The default monitor that the keyboard uses for camera switches. The keyboard will use
this monitor on power-up and if the Select Monitor Softkey is pressed followed by Enter
(ie no monitor number selected).
1
Relay monitor The monitor number used in the Relay monitor copy function. 1
Spot vcr The VCR number which is used when the Record button is pressed (in all modes except
VCR mode).
1